| Search |
| [Next Page] |
Building my first oud
adjusting the braces:
The tool is in place in the back and a straightedge is put on top representin ... |
10-3-2009 at 01:07 AM
by: GUY |
Building my first oud
The two ends of the tool have a pin corresponding to two small holes on the sound board axis (those ... |
10-3-2009 at 12:51 AM
by: GUY |
Building my first oud
Now I started what I consider as the most critical part of oud building : The braces.
My concerns a ... |
10-3-2009 at 12:42 AM
by: GUY |
Building my first oud
What is Manol? |
9-28-2009 at 12:33 PM
by: GUY |
Building my first oud
Now a long task:cutting the rosace I made a plywood with scraps of the rips (walnut).I tried to cut ... |
9-28-2009 at 08:41 AM
by: GUY |
Building my first oud
Thanks Rotemor
I follow also Dr oud' book which is my base of building and also the explanations of ... |
9-27-2009 at 11:42 AM
by: GUY |
Building my first oud
Hi Aytayfun
Teçekür ederim for your encouragements ! |
9-27-2009 at 08:53 AM
by: GUY |
Building my first oud
The result : |
9-26-2009 at 11:31 AM
by: GUY |
Building my first oud
The white disc is shape to the internal diameter and makes possible to keep the right lenght during ... |
9-26-2009 at 11:28 AM
by: GUY |
Building my first oud
In order to size the inlays of the rosace I built a tool made of 4 discs .The first sized of the int ... |
9-26-2009 at 11:17 AM
by: GUY |
Building my first oud
Fist inlays in place .I made an error with the router for the rosace .So it will be a little wider t ... |
9-21-2009 at 12:12 PM
by: GUY |
Building my first oud
This is a small device I made to perform good edges for the circular grouves which will receive the ... |
9-21-2009 at 12:08 PM
by: GUY |
Building my first oud (Turkish)
Sorry Yaron .I did see your response on the next page |
9-19-2009 at 09:46 AM
by: GUY |
Building my first oud (Turkish)
Good work Yaron .Your mould is very inventive .I do not understand the use of the clamps on the moul ... |
9-19-2009 at 09:40 AM
by: GUY |
Building my first oud
Thanks for your advice Theodoropoulos.
I am thinking about a jig to transfert the whole braces on t ... |
9-16-2009 at 11:09 PM
by: GUY |
Building my first oud
Thanks Paulo |
9-16-2009 at 08:05 AM
by: GUY |
Building my first oud
Next task is the bracing .I red many things about the braces but still have concerns about the late ... |
9-16-2009 at 07:29 AM
by: GUY |
Building my first oud
sanding the inlay
|
9-16-2009 at 07:13 AM
by: GUY |
Building my first oud
other pictures
[file]11189[/file] |
9-16-2009 at 07:09 AM
by: GUY |
Building my first oud
thanks for your comments. I think next time I will try the open form ,although the wedges I used on ... |
9-16-2009 at 07:06 AM
by: GUY |
Building my first oud
Back finished ,hum...not perfect but it the first shot! |
9-15-2009 at 01:19 AM
by: GUY |
Building my first oud
simple bending iron but it works |
9-15-2009 at 01:10 AM
by: GUY |
Building my first oud
I used tapes for the first ribs but noticed that the tension relaxed after ten minutes causing some ... |
9-15-2009 at 01:01 AM
by: GUY |
Building my first oud
hello every oud builders,
After reading and reading again all the topics of this forum ,I took the ... |
9-15-2009 at 12:21 AM
by: GUY |
Tabs for oud
I don't think it is a good idea . Oud should be learnt and played like a violin , I mean without see ... |
8-31-2009 at 11:28 PM
by: GUY |
| [Next Page] |
