Search |
[Next Page] |
Detailing renaissance lute rosette Here's the result At least better as in my first time.
However, great tip with that shell ... |
2-22-2015 at 01:07 PM by: antekboodzik |
Detailing renaissance lute rosette Shall I apply shellac with a cloth/pad or better use a soft brush? |
2-17-2015 at 09:19 AM by: antekboodzik |
Detailing renaissance lute rosette Hi, help me please to manage with some issues regarding finishing lute rosette.
What it is, it is ... |
2-16-2015 at 11:44 AM by: antekboodzik |
Thinnest pick guard material recommendations See that there are two types of static kling-on tap plates - one, really tought, used as a golpeador ... |
1-27-2015 at 02:21 AM by: antekboodzik |
Thinnest pick guard material recommendations https://www.lasonanta.eu/en/guitarras-flamencas-clavijeros-golpeadores-unas-zapatos-para-flamenco/gu ... |
1-26-2015 at 10:11 AM by: antekboodzik |
Walnut fingerboard - needs treatment? Epoxy glue won't penetrate wood.
If it is an open pore wood (OR with severe damage from playing) ... |
11-15-2014 at 02:54 PM by: antekboodzik |
Walnut fingerboard - needs treatment? Now I remember that Dan Erlewine in his DVDs about (re)fretting guitars was presenting the usage of ... |
11-15-2014 at 03:38 AM by: antekboodzik |
Walnut fingerboard - needs treatment? I used a little of linseed oil (boiled, from a shop for painters) on a couple of instrument, even ve ... |
11-14-2014 at 03:09 PM by: antekboodzik |
Workshop Rework It is very hard to find a decent hand cranked grinder. I tried a few times with old, vintage ones, b ... |
11-4-2014 at 11:46 AM by: antekboodzik |
Workshop Rework Dear jdowning,
may I ask about your grinder? Are these two screws (shown with arrows) that are u ... |
10-31-2014 at 04:01 PM by: antekboodzik |
lute pegbox design No, it is temporairly hold by ordinary screw and a nut used as a distancer.
However, brill' quest ... |
10-9-2014 at 02:07 PM by: antekboodzik |
lute pegbox design Thanks for your support.
However, yesterday I just finished the pegbox I made it exactly the w ... |
9-3-2014 at 10:25 AM by: antekboodzik |
lute pegbox design I would like to ask for advise some experienced builders about some principles of lute pegbox design ... |
7-23-2014 at 03:55 PM by: antekboodzik |
The Question of Soundhole Acoustics Well, it's going to be too much complicated...
I have a little different understanding of "3dB b ... |
6-5-2014 at 03:23 PM by: antekboodzik |
The Question of Soundhole Acoustics Very interesting and informative topic, I have learned a lot analyzing thoughts presented here, real ... |
5-31-2014 at 01:01 PM by: antekboodzik |
The Question of Soundhole Acoustics What makes sense to me is comparing different samples of sound, to see for similarities.
I did so ... |
5-30-2014 at 11:30 AM by: antekboodzik |
The Question of Soundhole Acoustics Ok, I've borrowed some stuff and quickly got some results
In my oppinion, comparing result of ... |
5-30-2014 at 11:08 AM by: antekboodzik |
The Question of Soundhole Acoustics Thanks! Here are few more. Sound clip was the same, but I chose different single "knocks" (or group ... |
5-29-2014 at 11:10 AM by: antekboodzik |
The Question of Soundhole Acoustics [b]Edited 28.05.2014[/b]
Hope You will forgive if I vouchsafe some of my oppinions.
I couldn't ... |
5-27-2014 at 02:25 PM by: antekboodzik |
Yet more making pegs Thanks for comprehensive explanation. With that I have prepared one tool, which was an HSS tool blan ... |
5-17-2014 at 01:53 PM by: antekboodzik |
The Question of Soundhole Acoustics May I add something?
What your setup resembles to me, is an udu
African Udu is an almost "p ... |
5-9-2014 at 12:04 AM by: antekboodzik |
Yet more making pegs That's it! Thanks
I found that if I set the grinder to rotate backwards (an improvised one, po ... |
5-8-2014 at 07:33 AM by: antekboodzik |
Silk Oud Strings - Making Sense of the Historical Data Sheep gut for sausage casings is cheap and readily available... Many times I was thinking of try to ... |
5-4-2014 at 04:41 AM by: antekboodzik |
Yet more making pegs Thank you very much for your support and encouragement. There are yet 8 pegs
However, let me a ... |
5-3-2014 at 08:08 AM by: antekboodzik |
Yet more making pegs I forgot to add, that I found that the belt is set to be rather loose. If I tried to tighten it (or ... |
5-2-2014 at 09:21 AM by: antekboodzik |
[Next Page] |