Search |
[Next Page] |
Building my first oud Drilling all the string holes at the same height in the bridge is not easy as the drilling device , ... |
9-28-2010 at 08:49 AM by: GUY |
Building my first oud Hello everybody.
After 10 months silent I come back to give some informations about the maturing of ... |
9-27-2010 at 11:30 PM by: GUY |
Building my first oud thanks Yaron |
11-3-2009 at 07:26 AM by: GUY |
Building my first oud Thanks Luttgutt |
11-2-2009 at 07:10 AM by: GUY |
Building my first oud Strings in place and first trial playing .Not so bad but according to Dr.advice a little "maturity " ... |
11-2-2009 at 01:49 AM by: GUY |
Building my first oud Sounboard edge finished and sanded.Tomorrow Iwill put the strings to check wether everything is corr ... |
10-28-2009 at 09:53 AM by: GUY |
Building my first oud Thanks Muthada |
10-28-2009 at 01:15 AM by: GUY |
Building my first oud The soundboard edge is cut for receiving the edge tiles.Now I can confirm that the tool for position ... |
10-26-2009 at 08:30 AM by: GUY |
Building my first oud This a very cheap device to measure the thickness of the ribs during sanding.So long the defined thi ... |
10-24-2009 at 08:50 AM by: GUY |
Building my first oud The bridge is in elmwood .As I found the grain beautiful I did not paint it |
10-24-2009 at 12:05 AM by: GUY |
Building my first oud Correct Doc. I adjust the neck in order to have a little negative angle .Now a picture with the fing ... |
10-23-2009 at 11:59 PM by: GUY |
Repairing moroccan oud I think it is really a challenge to repair such damages.might be more difficult than building a new ... |
10-19-2009 at 08:50 AM by: GUY |
Building my first oud Fingerboard and pegbox assembled .Now waiting for the pegs |
10-15-2009 at 08:29 AM by: GUY |
Building my first oud " Is it possible to adjust the action (neck angle) after you put everything together? "
Not in th ... |
10-11-2009 at 10:24 PM by: GUY |
Building my first oud Fitting the neck to the neck block .The oud I bought in a oud shop in Paris (It is a second hand ins ... |
10-8-2009 at 11:27 PM by: GUY |
Building my first oud (Turkish) fantastic work and innovation.The sound seems to be great.
Congratulation Yaron |
10-8-2009 at 11:09 PM by: GUY |
Building my first oud The rosace is finished and in place .The center is a piece of bone glued on a thin epoxy plate (0,5m ... |
10-7-2009 at 08:57 AM by: GUY |
Building my first oud Thanks for the encouragements Peyman |
10-7-2009 at 08:47 AM by: GUY |
Building my first oud just for the pleasure to see the progress! |
10-6-2009 at 07:53 AM by: GUY |
Building my first oud The braces in place .I hope the jig played his role but confirmation will come only after cutting th ... |
10-6-2009 at 07:51 AM by: GUY |
My next oud project Hello Jameel
I followed your explanations regarding the edge tiles fitting (page9, posted 9-25-2005 ... |
10-4-2009 at 12:36 AM by: GUY |
Building my first oud Thanks Samir |
10-3-2009 at 06:34 AM by: GUY |
Building my first oud After drying and the jig removed ,the 2 pieces of wood are eliminated( by a light knock with an hamm ... |
10-3-2009 at 02:00 AM by: GUY |
Building my first oud After the gluing process the boths screws are screwed just to maintain the brace in place (both prin ... |
10-3-2009 at 01:51 AM by: GUY |
Building my first oud After fine fitting of the brace with the top ribs , the straightedge is removed , the brace is out o ... |
10-3-2009 at 01:38 AM by: GUY |
[Next Page] |