Mike's Oud Forums
Not logged in [Login - Register]
Go To Bottom

Search
Buzuq Frets
I'm wondering why do Buzuq have nylon strings used for frets rather than metal frets that is used in ...
1-11-2020 at 05:04 AM
by: Oudsofjoy
Sanding and polishing
Yes thatís what he meant, the gun stock finish I believe. I put on the oud that I sanded and worked ...
12-9-2019 at 08:22 AM
by: Oudsofjoy
Advice for String Manufacturers other than Pyramid or La Bella?
With my experience with buzzing issues, I tried Mari and has really bad tension causing too much buz ...
10-31-2019 at 03:03 AM
by: Oudsofjoy
Sanding
Thanks for the tip. Iíll make sure to not sand it down instead use the steel wool first.
10-31-2019 at 02:44 AM
by: Oudsofjoy
Sanding and polishing
Thank you, Iím afraid I did it already. Didnít run into any issues. But now Iím gonna need to find o ...
10-19-2019 at 01:11 PM
by: Oudsofjoy
Sanding and polishing
Started sanding. Iíll probably will be doing French polishing.
https://flic.kr/p/2hx2LYE
10-18-2019 at 04:05 PM
by: Oudsofjoy
Sanding and polishing
A friend had an old oud with some cracks and bad scratches. It also needs some repair. Iím wondering ...
10-17-2019 at 12:27 PM
by: Oudsofjoy
F to f tuning
Iím wondering how popular is this tuning and strings placement on Iraqi ouds with F to f tuning is. ...
9-27-2019 at 03:18 AM
by: Oudsofjoy
Can you recognize this oud? Who made it?
It Does look like a Syrian oud. Very similar to khalife but I canít read the Calligraphy.
9-25-2019 at 03:52 AM
by: Oudsofjoy
mic issue
With piezo disc it has to be glued on. So once I put it its permanent.
9-25-2019 at 02:51 AM
by: Oudsofjoy
Neck leaning back
It is a new our that came with strings made for Turkish tuning. I tuned it and tested sounded ok. Bu ...
9-24-2019 at 01:20 PM
by: Oudsofjoy
Neck leaning back
I am replacing strings on a Turkish oud and placing Arabic tuning strings. I noticed that without th ...
9-24-2019 at 03:18 AM
by: Oudsofjoy
mic issue
Paul, whereís the best spot to place the pick up on the Iraqi oud with floating bridge? I was thinki ...
9-24-2019 at 03:12 AM
by: Oudsofjoy
mic issue
Thank you all,
I took it out and bought a new jack meant for acoustic guitars, and soldered it and ...
9-19-2019 at 02:43 AM
by: Oudsofjoy
mic issue
The one wire is attached to the ground and one to the clip. all of the ouds have that same connectio ...
9-17-2019 at 04:28 AM
by: Oudsofjoy
mic issue
I recently purchased a few ouds from a builder in Turkey. however the mic inserts have an issue. whe ...
9-17-2019 at 03:39 AM
by: Oudsofjoy
Fingerboard repair for Sukkar oud
A friend has a Sukkar Oud that sounded great, but he broke the fingerboard. He attempted to repair i ...
4-27-2018 at 01:35 PM
by: Oudsofjoy
buzzing on the fingerboard
Thanks for the tips,
I looked through it for any signs of cracks of pumps. I added new la bella st ...
4-27-2018 at 01:31 PM
by: Oudsofjoy
buzzing on the fingerboard
I'm hearing buzzing when I play certain notes on the Re and Sol strings, and it's a new oud. I'm pre ...
4-25-2018 at 03:46 PM
by: Oudsofjoy
ovangkol wood in oud
Sounds amazing, beautiful oud and nice playing.
2-7-2018 at 06:16 PM
by: Oudsofjoy
Oud Stands: metal, wood, vertical or horizontal...
That's what I use, it's cheap and the oud really stands out in it. the stand is also foldable, so it ...
2-2-2018 at 05:22 AM
by: Oudsofjoy
ovangkol wood in oud
I'm wondering if anyone had the opportunity to play on an oud made with ovangkol wood. In guitars it ...
2-2-2018 at 05:17 AM
by: Oudsofjoy
Bulent kivrak ouds
12-23-2017 at 03:50 AM
by: Oudsofjoy
Bulent kivrak ouds
Anyone have good buying experience with BŁlent Kivrak and like the ouds he makes?
12-20-2017 at 07:57 PM
by: Oudsofjoy

  Go To Top

Powered by XMB
XMB Forum Software © 2001-2011 The XMB Group