Mike's Oud Forums
Not logged in [Login - Register]
Go To Bottom

[Next Page]
WHY is hamza al din so damn good?
Well put Charlie. I am sure you know I was obviously joking. Just like the best sword is the Excalib ...
10-18-2017 at 10:40 AM
by: SamirCanada
WHY is hamza al din so damn good?
yes... you need his Nahat.
10-18-2017 at 09:11 AM
by: SamirCanada
A medieval fusion oud/lute
my friend,
your dowel is not nearly long enough. that's furniture grade stuff you are using. it sh ...
10-16-2017 at 11:56 AM
by: SamirCanada
Heard of this maker? Worth restoring?
Yes those should close up with some hide glue and tape pressure. Worst thing you can insert a spruce ...
10-13-2017 at 05:06 AM
by: SamirCanada
Old Original Fathi Amin Oud for sale (1993/12/12)
Wow very nice sound. I am not in the market for a new oud but this is a good purchase.
10-12-2017 at 04:16 PM
by: SamirCanada
Heard of this maker? Worth restoring?
I would restore this oud if I was in your shoes. 1931 ouds are not very common and it isn't in that ...
10-12-2017 at 04:15 PM
by: SamirCanada
quilted maple oud
Thank you Kelly. I started it on a regular mold but then I realized the bulk heads were getting in t ...
10-10-2017 at 04:39 PM
by: SamirCanada
Risha Technique

I posted this a while back. It's a good exercise to try.
Trémolos r ...
10-10-2017 at 07:16 AM
by: SamirCanada
Question about the endclasp or endcap
Typically ouds don't have a thick end cap like Lutes. If they do it is usually a veneer over the rib ...
10-2-2017 at 05:43 AM
by: SamirCanada
quilted maple oud
I haven't posted some project pictures in a very long time.

I would like to share with you guys ...
9-27-2017 at 12:28 PM
by: SamirCanada
Sanding a fingerboard. Question?
you are fine with a block the length of a regular sand paper sheet.

I would say, use a piece of ...
9-20-2017 at 05:47 AM
by: SamirCanada
Advice please. Re fingerboard.
you can try CA "superglue" finish to level the holes. if you do this, you should bring back the acti ...
9-18-2017 at 11:10 AM
by: SamirCanada
not oud related .. ney advice
Yes, they are not very good.
I would say its ok to learn but if you want to play alongside some mu ...
9-15-2017 at 08:22 AM
by: SamirCanada
Oud Damaged on Jetblue - Need Help
TAKE the strings OFF!! its not going to stay in place long!

yes VIKEN I am sure can help. But bes ...
9-15-2017 at 08:16 AM
by: SamirCanada
Pegs pegs pegs!
I order from India on Alibaba. sometimes you can find cheap on Ebay too.
9-15-2017 at 05:20 AM
by: SamirCanada
finished Bois-rose Oud
Tislam Idak Abu Samra
8-24-2017 at 04:54 AM
by: SamirCanada
Some problems with my new Rabih Haddad Oud/
Thanks, nice oud and playing.

Thanks for sharing, I had seen this before but didn't know who's o ...
8-23-2017 at 06:25 AM
by: SamirCanada
Some problems with my new Rabih Haddad Oud/
here is my opinion on the subject. Full disclosure I don't know of this ouds or his work.

Regard ...
8-22-2017 at 12:24 PM
by: SamirCanada
I think he is on vacation. You can send him a whatsapp +306937147706 or through his instagram accoun ...
8-22-2017 at 05:18 AM
by: SamirCanada
French polishing
Also the best classical guitars are finished with shellac. Of all finishes, shellac is the best for ...
8-10-2017 at 11:40 AM
by: SamirCanada
Authenticity check for Fadel Oud
Not a chance...
8-3-2017 at 03:21 AM
by: SamirCanada
Aquila Strings(Reds) Feedback
Khalil, I have a risha by Yaron if you want to try it next time you come to Ottawa.
its very soft ...
7-28-2017 at 05:10 AM
by: SamirCanada
old oud identification
That fadel oud looks great. If you like the sound and it plays easily i would say it's a good purcha ...
7-15-2017 at 06:00 PM
by: SamirCanada
Looking for a good luthier in Lebanon/Beirut
Hi Alloushé,
Good luck with your trip to Lebanon. I went to Shahin music during my last trip to L ...
7-12-2017 at 08:14 AM
by: SamirCanada
Ibrahim Sukkar / Sukar Qanun / Kanun for sale
I sent you a u2u
7-11-2017 at 08:59 AM
by: SamirCanada
[Next Page]

  Go To Top

Powered by XMB
XMB Forum Software © 2001-2011 The XMB Group