Further adjustments to the action may also be possible by adjusting string height at the nut and/or bridge - the latter requiring re-drilling of the
bridge holes to a lower position, a modification that can be done with the bridge in place. Dependant upon the finger board thickness further small
adjustment is possible by planing material from the nut end. Maximum action effect is to lower string height at the bridge (string geometry being,
length of fingerboard = 1/3 string length)
Curious about the decoration on the bowl that seems to be created from individual tiles glued in place (?) - or is it just some kind of a printed
(paper?) overlay on a wooden bowl? |