Mike's Oud Forums
Not logged in [Login - Register]
Go To Bottom

Printable Version  
Author: Subject: help!!!!!!!!!!!
eldad
Oud Addict
***




Posts: 47
Registered: 5-18-2012
Member Is Offline


[*] posted on 7-11-2013 at 11:05 AM
help!!!!!!!!!!!


Hello everyone
Does anyone has an idea what can I do with oud face? i bent the ribs perfectly and it still asymmetric :mad:
View user's profile View All Posts By User
SamirCanada
Moderator
******




Posts: 3405
Registered: 6-4-2004
Member Is Offline


[*] posted on 7-11-2013 at 11:53 AM


Hi Eldad,

If you bent and fited the ribs perefctly, you wouldnt have a problem with asymetric face. The way I see it now, you have finished building the bowls and if they are a bit asymetric its not that big a deal. Just learn for next time.

The next step is to remove the bowl from the mold and place the bowl on the face, just trace the outline with a pencil and you have the right shape.




@samiroud Instagram
samiroudmaker@gmail.com
View user's profile View All Posts By User
eldad
Oud Addict
***




Posts: 47
Registered: 5-18-2012
Member Is Offline


[*] posted on 7-11-2013 at 07:56 PM


Thank you for your help samir . Is there anything I can do now?
View user's profile View All Posts By User
SamirCanada
Moderator
******




Posts: 3405
Registered: 6-4-2004
Member Is Offline


[*] posted on 7-12-2013 at 04:16 AM


If you mean assymetric as in the ribs are not even with eachother?, you can keep scraping and sanding the back if thats what you mean.

if you mean that it is assymetrical (lop sided) when you look at it from the bottom where the face goes, please look at this thread from Jameel of years ago. http://www.mikeouds.com/messageboard/viewthread.php?tid=1048&pa...

Once the ribs are assembled, you have to work with what you have. make the face on it and keep pluging along.




@samiroud Instagram
samiroudmaker@gmail.com
View user's profile View All Posts By User
jdowning
Oud Junkie
*****




Posts: 3485
Registered: 8-2-2006
Location: Ontario, Canada
Member Is Offline

Mood: No Mood

[*] posted on 7-12-2013 at 07:24 AM


As Samir points out if the completed bowl is assymetric you will have to live with it but - a millimeter or so is to be expected until experience is gained.

The assymetry is most likely due to 'ballooning' - where the ribs have not been fitted to the mold properly. This tends to be a cumulative error if not corrected as assembly of the bowl proceeds. When working with a mold - 'bulkhead' style or solid - not only must the ribs be joined perfectly edge to edge but they must also be in contact with the mold surfaces - without any forcing of the ribs onto the mold. That is there should be no space left between the ribs and the surfaces of the bulkheads as assembly proceeds.

From your posted images there appears to be significant spaces left under the first (central) rib. It is best to make a bulk head mold with more bulkheads (six) - especially where the longitudinal curvature of the mold is greatest.
View user's profile View All Posts By User
aasuits
Oud Addict
***




Posts: 40
Registered: 2-6-2013
Member Is Offline


[*] posted on 7-12-2013 at 04:24 PM


Don't freak out!
cut a caul ( make a tracing of the side/area you want to match) out of 2 x 4 or whatever wood will allow you to clamp it over the area you want to reshape.
Just transfer the outline to the caul, bandsaw it carefully, and you have an inside and outside form. dampen the rib with warm water, clamp, and repeat if you need to.

many old ouds are quite asymmetric in outline.
I use a very simple mold with only an outline of the inside face, a bulkhead of the back middle rib, and a transverse arch at the widest part of the body. if you shape your ribs carefully it is all you need. I find this is best as you can really see what's going on with joints and shapes from the inside. and there is also a style of building "in air" with no form/mold at all. if your rib shapes are accurate that can be fine too.
View user's profile View All Posts By User
eldad
Oud Addict
***




Posts: 47
Registered: 5-18-2012
Member Is Offline


[*] posted on 7-13-2013 at 08:04 PM


Thanks I'll try it
View user's profile View All Posts By User
doroq
Oud Admirer
*




Posts: 7
Registered: 9-7-2011
Member Is Offline


[*] posted on 7-19-2013 at 01:46 PM


I'm on my 7th build. Not technically ouds, in scale or construction techniques, and I use the "open form"-- no mold, just end and neck blocks secured to a straight and square jig. I try to keep tight tolerances in regard to bends, but they've never come out totally symmetrical. BUT-- they all play and sound great to my ears, from the baby "baglamoud" to the "celloud" Each one has it's own character, and my style of building is rather improvisational, so I "roll with the punches" , so to say........
View user's profile View All Posts By User
Dr. Oud
Oud Junkie
*****




Posts: 1370
Registered: 12-18-2002
Location: Sacramento, CA, USA
Member Is Offline

Mood: better than before

[*] posted on 8-23-2013 at 07:58 AM


in my experience a bowel made by fitting to a mold is more likely to crack open because of the residual stress of bending the ribs in two directions (together and onto the mold.) The open method or using a mold as a general guide and not forcing the ribs to the mold shape will result in a stronger bowel.

Every old oud I have seen is asymmetric anyway, as are many hand made instruments - so what?. It is a cosmetic illusion that is totally unnecessary for the musical qualities of the instrument, and in some ways is detrimental as the woods are under stress before the string pressure is applied.

Of course this is only my opinion based on over 40 years of building and repairing ouds.




View user's profile Visit user's homepage View All Posts By User

  Go To Top

Powered by XMB
XMB Forum Software © 2001-2011 The XMB Group