bulerias1981
Oud Junkie
Posts: 763
Registered: 4-26-2009
Location: Beacon, NY
Member Is Offline
Mood: John Vergara Luthier Lord of the Strings instrument making and repair
|
|
Steaming trouble woods before bending
Over a year ago I completed an oud made from padouk.
I normally never have any problems bending woods like maple, or walnut.. but it was clear that working with padouk is very different. I had to be more
patient with it, thickness it to a more friendly bending thickness, and just work slow, because the stuff is brittle like glass!
I recently thought, what if the wood was properly steamed before bending, and did some research and it turns out some people do steam some trouble
woods. In this case, an expensive gorgeous wood I love for guitars, ziricote. https://www.youtube.com/watch?v=rqSglfu6xtA
|
|
|
Doc139
Oud Junkie
Posts: 173
Registered: 2-23-2013
Location: Winterthur Switzerland
Member Is Offline
Mood: oud-sick
|
|
Great looking bowl, John! My Nazih Ghadban oud's bowl is also made of Padouk, but of much darker (redish) color. I like this one!
Alexander
|
|
|
bulerias1981
Oud Junkie
Posts: 763
Registered: 4-26-2009
Location: Beacon, NY
Member Is Offline
Mood: John Vergara Luthier Lord of the Strings instrument making and repair
|
|
Thanks Doc139... the color is lighter here because this is a very blonde French polish finish. So it retained much of wood's natural color.
Unrelated here is the front of the oud
|
|
|
theodoropoulos
Oud Junkie
Posts: 177
Registered: 12-21-2008
Location: Greece
Member Is Offline
Mood: No Mood
|
|
I have used also padauk and although it seems softer than usual hardwoods it has the tendancy to come back to its beginning position.
In my opinion the key is the temperature of heating.With high temperatures you control it.
Steaming wood is a waste of time ,just spray with water..
and of course quartersawn.....never flatsawn 
|
|
|
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
