Marcus
Oud Junkie
Posts: 446
Registered: 11-26-2008
Location: Stuttgart/ South Germany
Member Is Offline
Mood: Lost in music
|
|
Varnish of Sukar-bowl
Hi fellow oudies,
on my Sukar oud the varnish on the back of the bowl has damages.
I think it comes from sweating while playing.
How can I fix this and what do I have to use ?
Thanx in advance,
Marcus
Playing the oud is like feeding my soul with peace
|
|
|
Marcus
Oud Junkie
Posts: 446
Registered: 11-26-2008
Location: Stuttgart/ South Germany
Member Is Offline
Mood: Lost in music
|
|
Hellooooooo
Nobody here who wants to help me?
Playing the oud is like feeding my soul with peace
|
|
|
SamirCanada
Moderator
Posts: 3404
Registered: 6-4-2004
Member Is Offline
|
|
the problem is we don't know what is the original varnish. I think it may be shellac because it has a bit of an orange tint but we cant tell for sure.
Either way you can use shellac. It will work. It can pretty much go on top of any varnish. Go for dewaxed shellac and it should work.
the technique is a bit complicated. I would recommend to very lightly sand (with 400 grit) the whole area to have a uniform surface. Then I would
brush on a few light coat of shellac. let it dry and sand it a bit in between to uniform. next day I would do some French polishing of the area and
try to blend it in. you may end up French polishing the whole instrument that way its a more even look.
good luck.
@samiroud Instagram
samiroudmaker@gmail.com
|
|
|
Marcus
Oud Junkie
Posts: 446
Registered: 11-26-2008
Location: Stuttgart/ South Germany
Member Is Offline
Mood: Lost in music
|
|
Dear Samir,
thank you verx much!
I'll try shellac in the way you mentioned.
Greets,
Marcus
Playing the oud is like feeding my soul with peace
|
|
|
bulerias1981
Oud Junkie
Posts: 763
Registered: 4-26-2009
Location: Beacon, NY
Member Is Offline
Mood: John Vergara Luthier Lord of the Strings instrument making and repair
|
|
Hard to tell from the photo but the wear doesn't look that bad. Honestly I've seen much worse. If it was my oud, honestly, I'd just leave it.
Refinishing it might be more work than worth it. You can try a less labor intensive finish if you do decided to refinish your oud called "Tru-oil" but
I find in the end it usually ends up to be more work than I originally anticipate.
|
|
|
bulerias1981
Oud Junkie
Posts: 763
Registered: 4-26-2009
Location: Beacon, NY
Member Is Offline
Mood: John Vergara Luthier Lord of the Strings instrument making and repair
|
|
Hard to tell from the photo but the wear doesn't look that bad. Honestly I've seen much worse. If it was my oud, honestly, I'd just leave it.
Refinishing it might be more work than worth it. You can try a less labor intensive finish if you do decided to refinish your oud called "Tru-oil" but
I find in the end it usually ends up to be more work than I originally anticipate.
|
|
|
Marcus
Oud Junkie
Posts: 446
Registered: 11-26-2008
Location: Stuttgart/ South Germany
Member Is Offline
Mood: Lost in music
|
|
Hi John
That sounds easy
I think I'll wait until it gets worse.
Actually it was my wife who have seen the "damage".As she knows how fussy I am, as soon as it comes to my ouds, she thought it might be better to
point out than listen to my angryness if something goes wrong with the oud.
Maybe I should remove the sign on my musicroom-door that says
You can
borough my car
empty my beer-locker
try to sell my grandma..............but dont touch my instruments!!!
Cheers
Marcus
Playing the oud is like feeding my soul with peace
|
|
|
Alsamaraie
Oud Admirer
Posts: 5
Registered: 6-27-2017
Location: Vancouver
Member Is Offline
|
|
I have the same issue only not to that extent. Only the shine has gone a little. I will try the same suggestion with the Shellac!
|
|
|
Omar Al-Mufti
Oud Junkie
Posts: 333
Registered: 3-14-2012
Member Is Offline
|
|
Dear...Sukkar uses shellac on the bowl. ...you can sand it with steel wool +++ and apply a couple of shellac coats if you know how to do french
polishing.....if not...just give it to any luthier...it is an easy job
|
|
|
Omar Al-Mufti
Oud Junkie
Posts: 333
Registered: 3-14-2012
Member Is Offline
|
|
Dear...Sukkar uses shellac on the bowl. ...you can sand it with steel wool +++ and apply a couple of shellac coats if you know how to do french
polishing.....if not...just give it to any luthier...it is an easy job
|
|
|
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
