antekboodzik
Oud Junkie
Posts: 109
Registered: 5-24-2010
Location: north poland
Member Is Offline
|
|
Early lute - end block vs (inner) tail strip
This will be a question for our Sir John, as he is the most experienced in early lute construction here, probably 
It is assumed, that lute body should have a thin, hot-bent reinforcing tail-strip glued inside the bowl after the bowl is completed and released from
its mould. But evidently some makers do contrary, placing a "more like oud" end block at the bottom of the mould, and then constructing a bowl:
https://www.instagram.com/p/BNOolNmh47c/
https://www.instagram.com/p/6Cs0WkoqOx/
Does it change anything? Is it "irregular" to what is looked upon as a proper method for building lute body, or simply a convenient option?
|
|
|
Naiman
Oud Admirer
Posts: 1
Registered: 3-5-2019
Member Is Offline
|
|
I would also like to know the answer to this question. Building a lute "in the air" seems like it might be quicker than having to first construct a
mold, so anchoring the ribs to a pre made inner reinforcement at the tail end should work, and be fitted better also than trying to install one after
building the bowl. Not having actually done this, I'll have to try it out.
|
|
|
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
