aquinas
Oud Admirer
Posts: 3
Registered: 12-10-2007
Member Is Offline
Mood: No Mood
|
|
snapped-off bridge!
first of all, hello! this is my first post, and i regret that it isn't under better circumstances--
today, my oud's fixed bridge snapped right off due to string tension. fortunately, the bridge and nut are intact and in one piece.
so, my question is, can i just fix the bridge back on the body with a wood epoxy? i fixed a crack on the back of it using epoxy and it's held up
extremely well. will it withstand the tension of 12 strings pulling at it?
|
|
|
Jesse Frank
Oud Lover
Posts: 23
Registered: 9-17-2007
Location: North Florida
Member Is Offline
Mood: No Mood
|
|
Take this with a grain of salt since I haven't done it yet, but regular titebond is purported to work well. Do not use tite bond 2 or 3, or the liquid
hide glue.
I think that the reasoning behind using titebond is that it's reversible with heat or steam if a repair is needed.
|
|
|
MatthewW
Oud Junkie
Posts: 1031
Registered: 11-5-2006
Location: right here
Member Is Offline
Mood: Al Salam
|
|
wow! that must have knocked your socks right off! What type of oud is it, and how was it tuned? try contacting Dr.Oud for more info on this repair
job. good luck!
http://www.droud.com/
|
|
|
Brian Prunka
Oud Junkie
Posts: 2916
Registered: 1-30-2004
Location: Brooklyn, NY
Member Is Offline
Mood: Stringish
|
|
my understanding is not to use epoxy . . . if for some reason the bridge were to pull loose again, it would almost certainly take some of the face
with it. I'm sure Jameel and Dr. Oud will weigh in here, but you can also search the forum because similar questions have been answered before.
here's one other thread with the same problem: bridge
dr. oud says epoxy is 3rd choice, after hide glue and titebond/carpenter's glue.
|
|
|
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
