juju
Oud Junkie
Posts: 125
Registered: 11-13-2011
Location: Paris - France
Member Is Offline
|
|
need advice about Kurschner strings
Hi,
I own a Syrian oud, the scale is 61,5 cm.
I use kurschner strings (see attachement), someone could tell me what is the tension of that strings on my oud ?
I saw on the internet that the kruschner strings are available in 3 different tensions : high, medium, low. Someone could tell me what is the type of
my strings ?
At present I would like to experiment a tension around 3kg, do I have to try lighter strings ?
Thanks.
Julien
Nb : my tuning is "arabic high F"
|
|
|
Matthias
Oud Junkie
Posts: 473
Registered: 1-24-2007
Location: Badenweiler, Germany
Member Is Offline
Mood: No Mood
|
|
Hello,
the set you actually have is an older one. I do not have any information about these sets about the tension. The new sets you can all find here in my
shop:
http://music-strings.de/index.php?k=137
About these new numberings I have a tension table. Send me a message through my shop and I can give you this table.
One problem is the scale. The sets are calculated for 60 cm and with your 61,5 cm scale you will always have a bit a higher tension.
regards
Matthias
|
|
|
juju
Oud Junkie
Posts: 125
Registered: 11-13-2011
Location: Paris - France
Member Is Offline
|
|
Thanks for your reply, I talked with the luthier who sold me the strings, those strings are "medium" ... the tension of the strings is around : 3,7
kg.
Should I try the lower strings set from Kurshner to reach 3,0 kg ?
What about the pyramid strings on my 61,5 cm oud ?
best,
julien
|
|
|
fernandraynaud
Oud Junkie
Posts: 1865
Registered: 7-25-2009
Location: San Francisco, California
Member Is Offline
Mood: m'Oudy
|
|
Par curiosite, why exactly do you want precisely 3 Kg tension? It's not unusual for a good set to not have perfectly matched tensions, some a bit
below 3 Kg and some almost reaching 4.
|
|
|
juju
Oud Junkie
Posts: 125
Registered: 11-13-2011
Location: Paris - France
Member Is Offline
|
|
I've read on the forum that the oud has is optimum of resonance between 2,8 and 3,2 kg.
At present my tuning is around 3,7kg. Isn't it too tight ?
I'm wondering if the "low tension" strings set from Kurschner should be a good option for me ????
|
|
|
![[*]](images/xmbprobrown/default_icon.gif){kind=icon}
